Audi Q5 Owners & Service Manuals

Audi Q5: Trailer hitch

Applies to vehicles: with Audi parking system plus with rearview camera and trailer hitch

For vehicles with a factory installed trailer hitch, or a trailer hitch installed according to factory specifications, the parking system rear sensors do not come on whenever you shift into reverse gear or when you press the FM switch. Remember, there is no warning for distances to the rear.

The front sensors remain activated. The visual display switches to the trailer towing mode. The picture from the rearview camera will not show the orientation lines nor the blue surfaces.

If you install a hitch yourself, this function may not work.

Error messages

Applies to vehicles: with Audi parking system plus with rearview camera

There is an error in the system if the LED on the switch is blinking and you hear a continuous alarm for a few seconds after switching on the parking system or when the parking system is already activated. Have your authorized Audi dealer correct the error.

Tips

If the error is not corrected before you switch off the ignition, when you switch on the parking system again, the LED in the switch will blink.

    READ NEXT:

     Safety

     Driving safety

     Basics

    Safe driving habits Please remember - safety first! This chapter contains important information, tips, instructions and warnings that you need to read and observe for your own safety, the safety of y

    SEE MORE:

     On Board Diagnostic System (OBD)

    Malfunction Indicator Lamp (MIL) The Malfunction Indicator Lamp (MIL) in the instrument cluster > fig. 8 is part of the On-Board Diagnostic (OBD II) system. The warning/indicator light illuminates when the ignition is switched on and goes out after the engine starts and the idle has stabilize

     Driving the automatic transmission

    Fig. 136 Shift gate on the center console: selector lever with release button Starting the engine The selector lever must be in P or N. Starting off Press and hold the brake pedal. Press and hold the release button in the selector lever handle, select the desired selector lever position suc

    © 2019-2026 Copyright www.audiq5.net