Audi Q5: Audi side assist
READ NEXT:
Applies to vehicles: with Audi side assist
Fig. 127 Sensor detection range
Fig. 128 Display on the exterior mirror
Side assist helps you monitor your blind spot and
traffic behind your vehicle. With
Applies to vehicles: with Audi side assist
Fig. 129 Driving situations
Fig. 130 Rear of the vehicle: Position of the sensors
Side assist functions at speeds above approximately
19 mph (30 km/h).
(1)
Applies to vehicles: with Audi side assist
Fig. 131 Driver's door: Side assist button
Press the button to switch the system on/off. The
LED in the button turns on when side assist is
switched on.
SEE MORE:
Removing
- Remove the brake caliper with the brake pads and brake
carrier. Refer to
→ Chapter "Brake Caliper, Removing and Installing".
Caution
Do not actuate the brakes or the electromechanical
parking brake when the brake caliper is removed.
- Remove the securing bolt
Radio -R-, Removing and Installing
- If replacing the control module, select the "Replace Control
Module" function on the Vehicle Diagnostic Tester.
Use Vehicle Diagnostic Tester.
- Activate the parking brake.
- Move the selector lever/gearshift lever all the way to the
rear.
-
Description
