Audi Q5: Driving
READ NEXT:
Manually adjustable steering wheel
The height and reach of the steering wheel can
be adjusted.
Fig. 98 Lever under the steering column
First, adjust the driver's seat correctly.
Pull the lever >
Starting engine with the key
The ignition is switched on and the engine started
with the ignition key.
Fig. 99 Ignition key
Starting the engine
Insert the key into the ignition lock.
Hybrid drive:
You can use the emergency key as an ignition key
in an emergency.
Fig. 100 Glove compartment: Adapter for emergency key
Fig. 101 Insert emergency key into the adapter
Take the adapter for the emer
SEE MORE:
Left Seal, Replacing, 0BC
In this chapter "right seal, replacing" is also described.
The shaft seal can be only be replaced with the final drive
removed.
Special tools and workshop equipment
required
Puller - Flanged Shaft -T10037-
Bearing/Bushing Installer - Multiple Use -VW295-
Seal Inst
Overview - Driveshaft, Mounted On Transmission Side
Note
Pay attention to the general repair information. Refer to
→ Chapter "Repair Information".
The attached driveshaft can only be separated from the
transmission if it is completely removed.
No repair work can be carried out on
