Audi Q5: Rear seat
General information
Safe transportation of passengers on the rear
seats requires proper safety precautions.
All passengers on the rear seats must be seated
in compliance with the safety guidelines explained. The correct
seating position is critical for the safety of
front and rear seat passengers alike.
WARNING
Adjusting seat
The fore-and-aft adjustment of the seat cushion
and the seatback angle can be adjusted.

Fig. 66 Adjusting seatback angle

Fig. 67 Fore-and-aft adjustment
Adjusting seatback angle
Fore-and-aft adjustment
- Pull the handle up and push the seat forward or
back > fig. 67.
- Release the handle and continue to push the
seat until the seat latch engages.
WARNING
READ NEXT:
Front head restraints
Fig. 68 Front seats head restraints: adjusting the height
The head restraints on the front seats can be adjusted
to provide safe support to head and neck
at the optimum height.
The armrest is adjustable in several stages and
can be moved forward and back.
Fig. 71 Armrest between driver's and passenger's seat
Adjusting the armrest
To adjust the armrest angle, pivot the arm
Expanding the passenger compartment
The rear seat backrests can be folded forward
separately or together.
Fig. 72 Release lever for the outer backrest
Fig. 73 Release button for the center backrest
SEE MORE:
Special tools and workshop equipment
required
Counterhold - Kit - Multiple Use -T10172- with Counterhold -
Kit - Adapter 5 - T10172/5-
Socket - Xzn 12 -T40154-
Engine and Gearbox Jack -VAS6931- with Universal
Transmission Support -VAG1359/2-
Removal
Pay attention to the general repair inform
Peened triple roller joint AAR 2600 i with 88 mm outer CV
joint
Peened triple roller joint AAR 3300 i with 100 mm outer CV
joint
1 - Clamp
Always replace if removed
For tensioning. Refer to
→ Chapter "Clamp on Triple Roller Joint and Outer Joint, Tensioning".
2 - P