Audi Q5 Owners & Service Manuals

Audi Q5: Refrigerant Circuit Components, Replacing

READ NEXT:

 General Information

Vehicles with a High Voltage System (Hybrid Vehicles) Extremely Dangerous Due to High-Voltage The high-voltage system is under high-voltage. Death or serious bodily injury by electric shock. - I

 Leaking or Damaged Components except A/C Compressor, Reservoir or Receiver/Dryer

The refrigerant circuit was completely empty (for example with larger leak or cracked hose)   Note In the event of only a minor leak with slow escape of refrigerant (e.g. at a small leakage

 Compressor, Replacing without the Need for Flushing Refrigerant Circuit

  Note Cleaning the refrigerant circuit means flushing with refrigerant R134a. Refer to → Chapter "Refrigerant Circuit, Cleaning (Flushing), with Refrigerant R134a". If a faulty A/C

SEE MORE:

 Drive Axle Threaded Connection, Loosening and Tightening

Special tools and workshop equipment required Torque Wrench 80-400Nm -VAG1576- Digital Torque Wrench -VAG1756A- Loosen the threaded connection between the drive axle and wheel hub - With vehicle still standing on its wheels, loosen bolt a maximum of 90º, otherwise wheel bearing will be

 Repairing a Wire 0.35 mm 2 or Greater with Individual Crimp Connector

Procedure - Free up the wire to be repaired approximately 20 cm on both sides of the repair point.   Caution Risk of damaging the electrical wires. Expose wrapped wiring harnesses carefully. - If necessary, removing the wiring harness wrapping using a knife. - Cut out the dam

© 2019-2026 Copyright www.audiq5.net