Audi Q5 Owners & Service Manuals

Audi Q5: Safety belt warning light

Audi Q5 Type 8R (2008 - 2017) Owner's Manual / Safety / Safety belts / Safety belt warning light

Your vehicle has a warning system for the driver and (on USA models only) front seat passenger to remind you about the importance of buckling-up.

Safety belts
Fig. 154 Safety belt warning light in the instrument cluster - enlarged

Before driving off, always:

  • Fasten your safety belt and make sure you are wearing it properly.
  • Make sure that your passengers also buckle up and properly wear their safety belts.
  • Protect your children with a child restraint system appropriate for the size and age of the children.

The warning light in the instrument cluster lights up when the ignition is switched on as a reminder to fasten the safety belts. In addition, you will hear a warning tone for a certain period of time.

Fasten your safety belt now and make sure that your passengers also properly put on their safety belts.

WARNING

  • Safety belts are the single most effective means available to reduce the risk of serious injury and death in automobile accidents.

    For your protection and that of your passengers, always correctly wear safety belts when the vehicle is moving.

  • Failure to pay attention to the warning light that come on, could lead to personal injury.

    READ NEXT:

     Why use safety belts?

    Frontal collisions and the law of physics Frontal crashes create very strong forces for people riding in vehicles. Fig. 155 Unbelted occupants in a vehicle heading for a wall Fig. 156 The vehicle cr

     Safety belts protect

    People think it's possible to use the bonds to brace the body in a minor collision. It's simply not true! Fig. 159 Driver is correctly rest rained in a sudden braking maneuver Safety belts used prope

     Safety belts

    Fastening safety belts Safety first - everybody buckle up! Fig. 160 Belt buckle and tongue on the driver's seat To provide maximum protection, safety belts must always be positioned correctly on the

    SEE MORE:

     Drive Axle Threaded Connection, Loosening and Tightening

    Special tools and workshop equipment required Torque Wrench 80-400Nm -VAG1576- Digital Torque Wrench -VAG1756A- Loosen the threaded connection between the drive axle and wheel hub - With vehicle still standing on its wheels, loosen bolt a maximum of 90º, otherwise wheel bearing will be

     Fiber-Optic Cables, Repairing

      Caution Do not bend the fiber-optic cable too much. The bending radius must be no less than 25 mm. Fiber optic cables must not be routed over sharp edges. The fiber-optic cable must not be dirty or touched with bare fingers. Fiber optic cables may not be heated. It is not permitted to tw

    © 2019-2026 Copyright www.audiq5.net