Audi Q5: Setup
The basic climate control settings can be adjusted in the radio or MMI.
- Select:
.png)
function button > А/С control
button. Or
- Select:
function button > Car systems
control button > А/С.
Automatic recirculation
When switched on, automatic recirculation controls the recirculation mode
automatically. If the windows fog up, press the
.png)
button.
Synchronization
When synchronization is switched on, the same settings are applied to both
the driver and front passenger, except for the seat heating/ventilation.
Synchronization switches off when you adjust the settings on the front
passenger's side.
You can also switch synchronization on by pressing and holding the knob on the
driver's side.
Supplementary heater
The supplementary heater warms the interior of vehicles with flexible fuel
engines, diesel engines or hybrid drive more quickly. The supplementary
heater is controlled automatically in the Auto setting.
READ NEXT:
Manually adjustable steering wheel
The height and reach of the steering wheel can
be adjusted.
Fig. 98 Lever under the steering column
First, adjust the driver's seat correctly.
Pull the lever >
Starting engine with the key
The ignition is switched on and the engine started
with the ignition key.
Fig. 99 Ignition key
Starting the engine
Insert the key into the ignition lock.
Hybrid drive:
SEE MORE:
1 - Bolt
Quantity: 4
2 Nm
2 - Rubber Buffer
Quantity: 4
Insert in the trim panel
3 - Bracket
Quantity: 12
Insert in the trim panel
Replace if damaged or deformed
Remove the clips that are still in the mounting points on the body
using the Omega Clip Tool
Left Seal, Replacing, 0BC
In this chapter "right seal, replacing" is also described.
The shaft seal can be only be replaced with the final drive
removed.
Special tools and workshop equipment
required
Puller - Flanged Shaft -T10037-
Bearing/Bushing Installer - Multiple Use -VW295-
Seal Inst
