Audi Q5 Owners & Service Manuals

Audi Q5: Storage compartment in the roof

Audi Q5 Type 8R (2008 - 2017) Owner's Manual / Operation / Seats and storage / Storage compartment in the roof

Seats and storage
Fig. 95 Storage pocket in the roof

  • To open the lid you have to touch the bar > fig. 95 (Arrow). The lid opens automatically.
  • To close the lid, push it up until it engages.

WARNING

Always keep the lid closed while driving to reduce the risk of injury during a sudden braking maneuver or in the event of an accident.

Coat hooks

Seats and storage
Fig. 96 Coat hooks at rear doors

WARNING

  • Hang clothes in such a way that they do not impair the driver's vision.
  • The coat hooks must only be used for lightweight clothing. Do not leave any heavy or sharp edged objects in the pockets which may interfere with the side curtain airbag deployment and can cause personal injury in a crash.
  • Do not use coat hangers for hanging clothing on the coat hooks as this can interfere with proper deployment of the side curtain airbags in an accident.
  • Do not hang heavy objects on the coat hooks, as they could cause personal injury in a sudden stop.

    READ NEXT:

     Warm and cold

     Description

    The climate control system warms, cools and adds humidity to the air in the vehicle interior. It is the most effective when the windows and panoramic sliding sunroof are closed. If there is a build-up

     Operation

    We recommend pressing the [AUTO] button and setting the temperature to 72 ºF (22 ºС). Fig. 97 3-zone deluxe automatic climate control: controls Press the buttons to turn the functions on or off.

    SEE MORE:

     Overview - Microphone Unit

    The Microphone Unit In Front Roof Module -R164- in installed in the Front Interior Lamp -W1-. Depending on the equipment, there are up to three microphones installed. One microphone (Interior Microphone -R74-) is connected directly to the Digital Sound System Control Module -J525-. The other mic

     Left Seal, Replacing

    Left Seal, Replacing, 0BC In this chapter "right seal, replacing" is also described. The shaft seal can be only be replaced with the final drive removed. Special tools and workshop equipment required Puller - Flanged Shaft -T10037- Bearing/Bushing Installer - Multiple Use -VW295- Seal Inst

    © 2019-2026 Copyright www.audiq5.net