Audi Q5: Description
The climate control system warms, cools and
adds humidity to the air in the vehicle interior. It
is the most effective when the windows and panoramic
sliding sunroof are closed. If there is a
build-up of heat inside the vehicle, ventilation
can help to speed up the cooling process.
In all heating mode functions except defrost, the
blower only switches to a higher speed once the
engine coolant has reached a certain temperature.
Condensation from the cooling system can drip
and form a puddle of water under the vehicle.
This is normal and does not mean there is a leak.
Pollutant filter
The pollutant filter removes pollutants such as
dust and pollen from the air.
The air pollutants filter must be changed at the
intervals specified in your Warranty & Maintenance
booklet, so that the air conditioner can
properly work.
If you drive your vehicle in an area with high air
pollution, the filter may need to be changed
more frequently than specified in your Audi Warranty
& Maintenance booklet. If in doubt, ask
your authorized Audi Service Advisor for advice.
Key coded settings
The climate control settings are automatically
stored and assigned to the remote control key
that is in use.
WARNING
Reduced visibility is dangerous and can cause
accidents.
- For safe driving it is very important that all
windows be free of ice, snow and condensation.
- Completely familiarize yourself with the
proper use and function of the heating and
ventilation system and especially how to defog
and defrost the windows.
- Never use the windshield wiper/washer system
in freezing weather until you have
warmed the windshield first, using the heating
and ventilation system. The washer solution
may freeze on the windshield and reduce
visibility.
Note
- If you suspect that the air conditioner has
been damaged, switch the system off to
avoid further damage and have it inspected
by a qualified dealership.
- Repairs to the Audi air conditioner require
special technical knowledge and special
tools. Contact an authorized Audi dealer for
assistance.
For the sake of the environment
By reducing the amount of fuel you use, you
also reduce the amount of pollutants emitted
into the air.
Tips
- Keep the air intake slots (in front of the
windshield) free from ice, snow and debris
in order to maintain the proper function of
the climate control system.
- The energy management system may switch
the seat heating or rear window defroster
off temporarily. These systems are available
again as soon as the energy balance has
been restored.
- The air flowing out of the vents and
throughout the vehicle's entire interior is
discharged at the rear of the vehicle. Make
sure that the outlet slots are not covered by
clothing, etc.
READ NEXT:
We recommend pressing the [AUTO] button and setting the temperature to 72
ºF (22 ºС).
Fig. 97 3-zone deluxe automatic climate control: controls
Press the buttons to turn the functions on or off.
The basic climate control settings can be adjusted in the radio or MMI.
Select:
function button > А/С control
button. Or
Select:
function button > Car systems
control button > А/
SEE MORE:
Using the manual shift program you can manually
select gears.
Fig. 137 Center console: shifting the gears manually
Fig. 138 Steering wheel: Shift paddles
Gear selection with selector lever
The tiptronic mode can be selected either with
the vehicle stationary or on the move.
Push the selector lev
1 - Blind Rivet
Quantity: 5
Rivet the guide rails beginning at the top.
2 - Guide Rail
To remove, drill out rivet heads -4-
and drive out rivet shafts.
3 - Drip Rail
Press into the guide rail as far as the stop, beginning at the top
and working toward the bo