Audi Q5: Using Service Station
READ NEXT:
Vehicles with a high-voltage system (hybrid vehicles)
Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious
bodily injury by electric shock.
- I
Observe the following with regard to service station
operation. Refer to the Parts Catalog (Tools; Special Tools and
Equipment: A/C and Heating).
- The filters and dryers installed must be repl
Work procedure may vary depending on the type of tools
selected (the tool-specific operating instructions should
therefore be followed).
The refrigerant circuit is to be discharged if parts of th
SEE MORE:
Fig. 82 Roof railing: positioning the roof rack
Fig. 83 Roof railing: installing a roof rack
The roof rack set consists of a front and rear roof
rack, the cover profile and a socket wrench.
Open the cap 1 > fig. 83.
Before mounting the roof rack, use the socket
wrench 2 and loosen the left
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Torque Wrench 1332 40-200Nm -VAG1332-
Torque Wrench 1332 Insert - Ring Wrench - 18mm -VAG1332/10-
or
Torque Wrench 1332 Insert - Ring Wrench - 21mm -VAG1332/7-
Note
Two different wheel bearing housing
