Audi Q5: Driver information system
READ NEXT:
General notes
The driver information display inside the instrument cluster provides you,
the driver, with much useful information.
Fig. 9 Instrument cluster: center display
Information from the driv
Introduction
The trip computer gives you information on current and average fuel
mileage, average speed, fuel range and driving time.
Fig. 15 Trip computer display: Average fuel mileage
The followin
Description
Applies to vehicles: with efficiency program
Fig. 18 Display: efficiency program
Press the [RESET] button B > fig. 17 repeatedly until the efficiency
program appears in the display
SEE MORE:
Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL)
in the instrument cluster > fig. 8
is part of the On-Board Diagnostic (OBD II) system.
The warning/indicator light illuminates when the ignition is switched on and
goes out after the engine starts and the idle has stabilize
The operation of the Electronic Stabilization Control
(ESC) is expanded for operation away from
paved roads. In situations where slip or a differential
locking function is required, the offroad
mode can be activated. Your Audi also
has permanent all-wheel drive in addition.
However, your Audi is no
Introduction
