Audi Q5: Interior Lights, Switches
READ NEXT:
General Information
The anti-theft immobilizer system control module can
depending on the vehicle be integrated in the following systems:
Instrument Cluster Control Module -J285-
Comfort System Ce
Trailer Hitch Socket, Removing and Installing - Version 1
Removing
- Turn off the ignition and remove the key.
- Remove the bolts -arrows-.
- Detach the socket from the retaining plate.
SEE MORE:
Removing
- Remove the noise insulation. Refer to
→ Body Exterior; Rep. Gr.66; Noise Insulation.
- Disconnect left and right connectors
-2-.
- Remove the left and right nuts -1-
and the clamp -3-.
- Remove the stabilizer bar.
Installing
Install in reverse order
Special tools and workshop equipment
required
Spring Tensioning System -VAS6274-
Spring Tensioning System - Audi Set -VAS6274/10-
Spring Tensioning System - Q5 Set -VAS6274/11-
Note
It must only be converted once. It is not necessary to
convert back again.
- Remove the tensioning
Immobilizer
