Audi Q5: Special Tools
Special tools and workshop equipment
required
- Used Oil Collection and Extraction Unit -SMN372500-
- Counterhold - Multiple Use -T10172A-
- Adapter -T10172/5-

- Puller - Ball Joint -T40010A-

- Torx Socket - T60 -T40087-

- Hose Clip Pliers -VAG1275A-

- Torque Wrench 1331 5-50Nm -VAG1331-

- Tool insert AF 17 -VAG1331/6-

- Torque Wrench 1332 40-200Nm -VAG1332-

- Torque Wrench 1332 Insert - Ring Wrench - 21mm -VAG1332/7-

- Torque Wrench 1332 Insert - Ring Wrench - 18mm -VAG1332/10-

- Power Steering Test Unit -VAG1402-

- Power Steering Test Unit - Adapter 3 -VAG1402/3-

- Power Steering Test Unit - Adapter Hose -VAG1402/6-
- Power Steering Test Unit - Adapter Set -VAG1402/17-
- Power Steering Test Unit - Adapters -VAG1402/18-

- Torque Wrench 1410 -VAG1410-

- Torque Wrench 1410 Insert - Accessory Kit -VAG1410/1-

- Clamping Pliers -VAG1682A-
- Clamping Pliers - Jaws -VAG1682A/1-

- Torque Wrench 1783 - 2-10Nm -VAG1783-

- Hose Clip Pliers -VAG1921-

- Torque Wrench Insert - Open Jaw -VAG1923-
- Engine Bung Set -VAS6122-


- Shop Crane - Drip Tray -VAS6208-

- Steering Wheel Scales -VAS6458-

- Hose Clamps - Up To 25 mm -3094-


- Wrench - Door Adjusting -3320- with Wrench - Door Adjusting
- Box Wrench -3320/2-

Edition: A005Q500121 - LC-05/08/2015 - TMP
READ NEXT:
SEE MORE:
General Information
Note
Connect the A/C service station. Refer to
→ Chapter "A/C Service Station, Connecting".
Observe the test requirements. Refer to
→ Chapter "Pressures, Checking".
- With the ignition switched off, check the pressure in the
refrigerant circuit (u
Electromechanical Steering Gear Tie Rod, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1332 40-200Nm -VAG1332-
Torque Wrench 1332 Insert - Ring Wrench - 21mm -VAG1332/7-
Hose Clip Pliers -VAG1921-
Torque Wrench Insert - Open Jaw -VAG1923-
Clamping Pliers