Audi Q5: Energy flow display
Applies to vehicles: with hybrid drive
Fig. 112 Instrument cluster: energy flow display
The energy flow of the hybrid system is shown in
the instrument cluster display and in the MMI
display. The image is animated in the MMI display.
Image in the instrument cluster display
- Press the
.png)
button in the
windshield wiper
lever repeatedly until the energy flow display
> fig. 112 appears.
Fig. 113 MMI display: energy flow display
Image in the MMI display
- Select:
.png)
function button >
Hybrid control
button > fig. 113.
Tips
The Energy flow display will not shown in the
MMI display when the reverse gear is engaged,
due to safety reasons.
READ NEXT:
Applies to vehicles: with hybrid drive
Fig. 114 MMI display: consumption display
The consumption display shows the average energy
consumption and the recuperation quantity in
5 minute intervals.
Call
Applies to Vehicles: with hybrid drive
Fig. 115 Luggage compartment: vehicle tool bag and tire
repair set
The vehicle tool kit is found under a cover in the
cargo floor > fig. 115 (A), The tire re
Applies to vehicles: with hybrid drive
The vehicle is equipped with two 12 volt batteries
and a high voltage battery.
If the 12 volt batteries are dead, they may be
charged with a charger or the vehi
SEE MORE:
Caution
There is a risk of malfunctions.
The door lock must be removed and installed together
with the bracket to prevent overbending the cable when
disengaging and engaging it.
The cable must be disconnected from/attached to the
lever on the door lock outside of the door.
Removing
-&nbs
General Information
Only valves and connections that are resistant to
refrigerant R134a and refrigerant oil must be installed.
Different connections (outer diameter) for high pressure and
low pressure side.
Discharge the refrigerant circuit before removing valves or
valve inserts.
Always scr
