Audi Q5: Hybrid
READ NEXT:
Applies to vehicles: with hybrid drive
General information
The hybrid drive is a combined drive concept that automatically switches
between combustion engine and electric drive types or combines them
Applies to vehicles: with hybrid drive
The vehicle is started and turned off either with
the ignition key or with the
button in the
same way as a conventional vehicle.
When starting the vehicle, the
Applies to vehicles: with hybrid drive
The power meter shows the hybrid drive condition and the availability of
the hybrid system.
Fig. 110 Power meter overview
An economical driving and recuperatio
SEE MORE:
Boot, Replacing, Driveshaft Connected on Transmission Side
Special tools and workshop equipment
required
Flanging Tool -T40261-
Hose Clamp -23 to 35 mm Diameter-
Procedure
- Remove the driveshaft. Refer to
→ Chapter "Driveshaft, Removing and Installing, Driveshaft
Connected on Tra
Note
For repairing a 0.222 a repair
wire can be used as the intermediate wire with a cross section
of 0.35-mm2 or 0.5-mm2.
Procedure
- Free up the wire to be repaired at two places approximately
20 cm on both sides of the repair point.
Caution
Risk of damaging the electrical
Introduction
