Audi Q5: Final Drive
- Overview - Final Drive
- Final Drive Removing and Installing 0BC, Audi A4, A5, A6, A7, and Q%
(not Q5 Hybrid)
- Final Drive 0BC Removing and Installing, Audi Q5 Hybrid
- Final Drive Removing and Installing OBD, Audi A4, A5 and Q5
- Final Drive, Removing and Installing 0BF, Audi A4, A5, A6 and A7, Q5
READ NEXT:
Overview - Final Drive 0BC, 0BD
Rear Final Drive
1 - Subframe
Removing and installing. Refer to
→ Suspension, Wheels, Steering; Rep. Gr.42; Subframe; Overview -
Subfram
Special tools and workshop equipment
required
Engine and Gearbox Jack -VAS6931- with Universal
Transmission Support -VAG1359/2-
Tensioning Strap -T10038-
Engine/Gearbox Jack Adapter - Wheel Hub
Special tools and workshop equipment
required
Engine and Gearbox Jack -VAS6931- with Universal
Transmission Support -VAG359/2-
Tensioning Strap -T10038-
Engine/Gearbox Jack Adapter - Wheel Hub S
SEE MORE:
Special tools and workshop equipment
required
Pry Lever -80 - 200-
Removing
- Remove the instrument panel side cover. Refer to
→ Chapter "Instrument Panel Side Cover, Removing and Installing".
- Remove the gap cover -1- from
the A-pillar trim and the sill trim
-arrow-.
-
WARNING
Do not check or charge a Battery -A- when the visual
indicator has "no color or is
bright yellow". Jump starting must not be used!
There is a risk of explosion during testing,
charging or jump starting.
These Batteries -A- must be replaced.
Make sure the correct charging mode is
