Audi Q5: Radio
READ NEXT:
Radio Components
The radio consists of:
Symphony radio
Radio with integrated CD changer
Display Mid
Sound systems: basic/basic plus/Standard (8RX/9VD)
SD Memory Card Reader
Satellite Radio -R146
Radio -R-, Removing and Installing
- If replacing the control module, select the "Replace Control
Module" function on the Vehicle Diagnostic Tester.
Use Vehicle Diagnostic Tester.
- Activat
A - (AM/FM1/FM2) antenna jack
B - Black connection block with four multipin connectors
Note
Unlisted connector terminals are not assigned.
A - AM/FM1/FM2 antenna jack
&nbs
SEE MORE:
Removing
- Press belt height adjuster button and bring height adjuster
slide into lowest position.
- Remove the upper B-pillar trim panel. Refer to
→ Chapter "B-Pillar Trim Panel, Removing and Installing, Upper
B-Pillar Trim Panel".
- Move the upper B-pillar trim to the side
Removing
- Unplug connector for fiber optic cable from appropriate
control unit.
- Release the catch in the fiber optic cable connector in
direction of -arrow-.
- Pull the fiber optic cable basic module
-2- out of connector housing
-1-.
Caution
Make colored dots to mark
Overview - Radio
