Audi Q5: Exterior Equipment
READ NEXT:
Overview - Radiator Grille
Overview - Radiator Grille, Audi Q5
1 - Emblem
Removing and Installing. Refer to
→ Chapter "Front Emblems, Removing and Installing, Brand Emblems".
2&n
1 - Front Bumper Cover
2 - Fender
3 - Wheel Housing Cover for Fender
There are different versions. Allocation. Refer to the Parts
Catalog.
Removing and installing. R
1 - Blind Rivet
Quantity: 5
Rivet the guide rails beginning at the top.
2 - Guide Rail
To remove, drill out rivet heads -4-
and drive out rivet shafts.
3 - Drip
SEE MORE:
New engine
The engine needs to be run-in during the first 1,000 miles (1,500 km).
For the first 600 miles (1,000 kilometers):
Do not use full throttle.
Do not drive at engine speeds that are more than 2/3 of the maximum
permitted RPM.
From 600 to 1,000 miles (1,000 to 1,500 kilometers):
Spee
Sill Panel Strip, Removing and Installing, Front Sill Panel
Special tools and workshop equipment
required
Trim Removal Wedge -3409-
Omega Clip Tool -T40280-, is needed to remove any clips are
that still inside the body.
Removing
- Remove the instrument panel side cover. Refer to
→
